← Back to blog
Track HVAC receipts and equipment cost per job, not in the van

Track HVAC receipts and equipment cost per job, not in the van

HVAC receipts belong on the job the same day: equipment, fittings, refrigerant, crane. A pile in the van is not a job cost. Helmate is an app that holds receipts on the project so the margin stays honest. Photographing a receipt with scan is Pro Site. Basic: first month free, then $25/month for one open project.

The condenser was $1,840. The fittings, nitrogen, extra whip, and the Friday run for a float switch never hit the job. At month end the changeout 'did fine'. The van did not. HVAC receipts only count if they sit on the project, against the number you sold, not in a cup holder with three other sites.

US HVAC shops call it the invoice from the supply house. UK heating engineers bring merchant receipts. Australian air-con tradies have the wholesaler docket. Canadian HVAC uses both. Put the paper on the job the hour you get it. Country pages keep the money words local: US, UK, AU, CA.

One budget line per kind of cost

Equipment. Refrigerant. Electrical extras. Crane. Permit. Misc fittings. If everything lands in 'materials', you cannot see that fittings ate the margin while the unit was priced correctly. That is the same rule as one budget line per trade on a renovation, applied to mechanical.

Check the supply-house invoice against the quoted model. If the branch subbed a different coil, that is not 'close enough'. It is a new conversation with the customer and maybe a new quote: HVAC quote vs estimate.

Same-day, not month-end

Photograph the receipt before you leave the counter, or pin the PDF from the branch email onto the project the same afternoon. Month-end reconstruction from memory will miss the nitrogen and the extra filter drier. It will also mix Site A with Site B when you ran both on Tuesday.

On Helmate, receipt scan — the assistant reading the ticket — is Pro Site, not Basic. On Basic you can still type the amount onto the one open project and keep a photo in the files. Do not claim Basic scans the ticket. It does not.

Crane, refrigerant, and the quiet extras

Crane invoices arrive later. Put a placeholder on the job the day you book the crane, then replace it with the bill. Refrigerant you pulled from the shop cylinder still has a cost. If you do not put it on the changeout, the shop is subsidising the job and you will not see it.

Callbacks for a drain you already 'fixed' need their own receipts too, or you will think the original changeout was cheap. Tie the callback to the same project with a note: job notes so the extra visit has a reason.

What the office actually needs

Not a shoebox. A list per job: what was quoted, what was bought, what is still open. Export of those numbers for the office is Pro Crew in Helmate, not Basic and not Pro Site. If you are one tech, you may never need the export. If someone in the office builds a spreadsheet every Friday, Pro Crew is the plan that exists for that.

Helmate is not your accounts package. It does not replace the bookkeeper. It stops the receipts from never arriving at the bookkeeper.

A Tuesday with two supply houses

Morning: condenser and coil for the changeout on Oak. Afternoon: a capacitor, a contactor, and a pump for a no-cool on Pine. If both tickets land in the same camera roll with no project, Friday-you will guess. Guessing always assigns the expensive coil to the repair and the cheap capacitor to the changeout, or the other way around. Either guess makes one customer look unprofitable and the other look golden. Neither number is true.

Open Oak before you sign at the counter. Open Pine before the second counter. If the branch emails a PDF later, file it on the same project the same afternoon — not in a shared inbox named 'accounts'. The person who was on the roof will not remember which docket was which on Monday.

When the office pays the monthly account, they should be able to see Oak vs Pine without a forensic hunt. That is all job costing is, at this size: the paper on the job, same day, split by line. You do not need an ERP. You need to stop treating the van as a filing cabinet.

Schedule and cost are the same week

A crane that shows up because the schedule still said Wednesday, while the curb is wrong, is a crane bill on a job that could not use it. Living dates belong with living costs: HVAC scheduling. Maintenance contracts need receipts too — filters you supplied vs filters the customer bought — in the maintenance log.

What 'margin' means on a three-day changeout

Sold price minus equipment minus fittings minus refrigerant minus crane minus the extra electrical you ate because you did not write an extra. Labour is the other half, but most small HVAC shops lose the job on the silent materials, not on the hourly rate they remember. If the receipts are not on the job, you are guessing the silent half. Guessing feels optimistic until the month closes.

A maintenance visit has a thinner margin. One unlogged float switch from the van stock wipes it. Write the part on the visit the hour you use it, even if you bill it later. Especially if you bill it later. The same goes for nitrogen, extra whip kits, and the Saturday emergency fitting that never made it onto Oak because Pine was louder that afternoon. Silent stock is still a cost. If it left the van, it belongs on a job the same day, with the site name, or you will donate it to the month.

Free vs paid — Basic: first month free, then $25/month

Helmate is an app. Basic: first month free, then $25/month for one open project (planning or active). Finished jobs do not count. Calendar and tasks on that project are included. Hands-free talk, receipt scan, work email, and WhatsApp from the business are not on Basic.

Paid plans, from the catalog: Pro Site — $50 up to 3 open projects, hands-free talk and receipt scan, email and 1:1 WhatsApp, ₪5 of assistant help per day, 10GB storage. Pro Crew — $75 up to 10 open projects, export numbers for the office, ₪8 of assistant help per day, 15GB, everything in Pro Site. Pro Command — $125 unlimited open projects, WhatsApp groups, priority support, ₪12 of assistant help per day, 20GB, everything in Pro Crew.

Stay on Basic while you have one open changeout and you type amounts with photos. Pay Pro Site when you want the ticket scanned and more than one job open. Pay Pro Crew when the office needs an export. Do not skip the habit because the scan is paid — the habit is the same-day photo on the right project.

That habit is what makes next month's HVAC quote honest: you already know what fittings and crane really cost on the last changeout, because the receipts sat on the job.

A month of honest tickets also changes how you quote the next changeout. You see that fittings are never 'fifty bucks'. You see that the crane on a tight street costs more than the crane on an open pad. The next HVAC quote or estimate gets those lines because the last job actually had them, not because a software wizard invented a price. Helmate does not invent that wizard. It keeps the paper so you can.

FAQ

Does Helmate Basic scan HVAC receipts?

No. Receipt scan is Pro Site ($50). Basic: first month free, then $25/month with one open project: you can still keep photos and type the amount. Basic does not include scan, voice, or WhatsApp from the business.

How do I keep two supply-house runs from mixing?

Open the right project before you photograph the ticket. Write the site name if you are still in the parking lot. Never let a receipt sit unassigned until Friday.

Should crane and refrigerant sit in the same budget line as the unit?

No. Separate lines. The unit can be priced right while crane and gas destroy the margin. You only see that if the lines are split.

When is Pro Crew worth it for receipts?

When someone in the office must export numbers. Export is Pro Crew ($75), not Pro Site. If you are solo and never export, Pro Site may be enough once you outgrow one open project.

When do you pay for an HVAC app beyond Basic?

Basic: first month free, then $25/month for one open project with calendar and tasks. Choose Pro when you need more open jobs, or voice, receipt scan, email, and WhatsApp. Pro Site is $50 (3 projects), Pro Crew $75 (10), Pro Command $125 (unlimited open projects).

Ready to start?

Basic: first month free, then $25/month.

Start free